Supported tachographs

• Analogs:
  KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
• Digitals:
  DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.

Advantages

• No power connection nor battery charging required, the only tester powered by the tachograph itself.
• Compact size, the smallest tachograph tester on the market.
• User friendly, clear 4 lines menus, no training required.
• Automatic tachograph model detection on power on.
• Double accuracy of the W factor measure on track by detecting half pulses.
• The only tester being able to reset the odometer and change the sender type on the VR2400.
• Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.

 • W figure determination on measuring track (with optional photo-cell) or rolling road.
 • K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
 • Parameter programming.
 • Activation and deactivation of IMS (Independent Motion Signal).
 • Activation and deactivation of VDO counter.
 • Odometer reset and adjustment (mileage correction).
 • Speed simulation and customizable automatic test diagram.
 • DTCS reading (Digital) and erasing.
 • Sensor pairing (KITAS activation).
 • Clock test.
 • Workshop card’s PIN recording and input through CD400.

 • CD400
 • CD400-RS232 cable
 • CA-DIGITAL-0 cable
 • CA-CROCO-0 cable
 • CA-EGK100-0 cable
 • CA-KTCO-0 cable
 • CA-MTCO-1 cable
 • CA-1319-0 cable
 • FC-VR2400-1 cable